Do u want to build house?

Second life is a virtual life in which you can do everything that is possible and impossible in real life. For example you can build a house and it wants an effort like in real. Initially it’s seems to be quite difficult but when you get how to do it you can easily finish it in one hour. On account of the fact that building process is complicated enough firstly you have to decide what kind of house you want to build. To begin with, you should start with base of the house. To put a base firstly press a build button, which is located on the bottom of the screen. Then from the object menu select a cube and put it in a place where you decided to build your house. From the properties menu determine the values of x, y and z. They represent height, length and width of the cube. It is useful to note their values somewhere because you will need them. After the base of the future house has been put start with the walls. I recommend you to start with back wall and continue with left and then right one because front wall is more complicated than others. To put a wall press the build button as well and from the object menu select a cube. In object properties change length, height and width of future wall but be careful for the back wall length of the cube must be same with a length of the base of the house. To arrange the place of it drag and move green and red arrows. Blue arrows are used to change the height of the object. After putting the back wall continue with left and right ones. In this case the width must be calculated. Take the width of the base and subtract from it the width of back wall. The height of the walls must be same with each other’s. In other case you house will not be proportional and some walls may be too small or too big. After you have finished with three walls continue with front one. It is a little bit more difficult than others. Because of the door which is required in all houses your front wall must be constructed from three cubes. Firstly build two walls and leave between them a space. This space is going to be your door. This too wall’s height must be smaller than other wall’s because you will have to put one more cube on their top. The length of these cubes is up to you. The next step is putting a long rectangular cube on the top of front walls. The height of it must supplement the height of front walls to height of other walls. The length of it must be calculated by taken the length of base of the house and subtracting from it the length of right and left walls. One thing that you must be careful about is the thickness of walls. In order to built proportional house it must be same to all walls. For front and back walls thickness is y-variable (width), for left and right walls it is x-variable (length). Be sure that all walls are put in proper places and there are no any halls except the door. After you are sure that everything is ok it is time to put the roof of the house. The roof of the house can be different (cube, pyramid, semi-sphere and etc.). For example let’s build a house which roof is in the form of pyramid. As we did before firstly press to the build button and then open the object menu. This time instead of cube select a pyramid. In the properties menu determine the length, width and height of it. The width and the length must be same with base’s ones. Then place it in the top of the house. The final step is to change the colors of the walls you can do it easily. Select an object, right click on it then choose an edit option. From the properties menu you can change the texture and color of it. At first you can think that it is too difficult to build a house but when you start to you will see that it is quite simple. Good luck in your buildings…